Electrical Installation Work
1. Energy Distribution Systems
• MV (medium voltage) Systems: substations, MV cells, cable connections, power factor correction systems.
• NETWORK (low voltage) Boards: main distribution boards (MDB), sub-distribution boards (SMDB), colon boards, meter boards.
• Cabling: power cables, low voltage cables, busbar systems, earthing and lightning protection installations.
2. Lighting Systems
• Interior lighting: office, residential, factory, hotel, etc. in the field of general and decorative lighting.
• Outdoor lighting: garden, parking, front and LED lightings.
• Emergency lighting & Routing: in a fire or a power cut, which is activated in the system.
3. Sockets and lines of force
• General use receptacles, ups (uninterruptible power supply) electrical outlet lines.
• Industrial type the lines of force (e.g. 16A–63A CEE socket type systems).
• High power supply lines of the device (motors, pumps, fans, etc.)
4. Low Current Systems
• Fire detection and alarm system
• Card access and security systems (access control, CCTV)
• Phone and data (Network) Systems – CAT6, CAT7 engine
• Paging (Public Address / Voice Alarm Systems
• Nurse call, building management (BMS), gas detection systems
• TV – SMATV – IPTV Systems
5. Grounding and lightning protection
• Ground protection: safety of people and equipment earthed for electrical leakage.
• Lightning Wiring (Conductor / Faraday cage): the outside of the building from lightning strokes to ground transmit.
• Equipotential Busbars: the potential difference of different systems reset.
6. Generator and UPS systems
• Generator System: provide backup power in case of power loss to the building.
• Ups (uninterruptible power supply): for sensitive devices affected by the sudden power outage.
• Automatic transfer panel (ATS): a network-the system that controls the passage of the generator.
7. Automation and energy monitoring
• Building management system (BMS): Lighting, air conditioning, fan, pump, etc. central control of the system.
• Energy monitoring and reporting: instant tracking of energy consumption and optimization.
• Smart meter integration and automation.
8. Güneş Enerjisi ve Yenilenebilir Sistemler
• Rooftop PV systems, the inverter connections, energy storage engine.
• Network integration, clipboard transformer or solar panels.
Mechanical Works
1. Heating Systems
• Central heating system (natural gas, fuel oil, biomass, steam, hot water)
• Individual boiler or condensing boiler systems
• Heat pumps (air, water, soil borne)
• Radiators, underfloor heating systems, fan
• Work station (substation) systems – especially site & residences
2. Cooling (Air Conditioning) Systems
• Central air conditioning / Multi-Split Systems
• VRF / VRV systems
• Chiller + fan systems
• Cooling towers
• The refrigerant (refrigerant) lines and insulate piping
• Cooling unit water lines and pumps
3. Ventilation Systems
• Fresh air and exhaust lines
• Heat recovery units (HRU)
• Kitchen exhaust hoods and carbon filter systems
• Exhaust fans WC
• Smoke evacuation and pressurization systems (during the fire)
• Air ducts (galvanized, pre-insulated, textile type)
• Grille, diffuser, damper and silencer equipment
4. Plumbing Systems
• Clean water systems (water pump, a network connection, water tank)
• Waste water & sewage system (PVC, HDPE pipes SML)
• Storm water drainage system
• Grey / rain water recovery systems
• Hot water production (boiler, heat exchanger, solar panel integration)
• Water treatment system (water softening, filtration)
5. Fire-Fighting Systems
• Sprinkler systems (wet, dry, pre-action, deluge)
• Fire pumps (diesel, electric, jockey)
• Fire cabinets (hose reel, fire cabinet)
• Hydrant system
• Foam extinguishing systems (warehouses, hangars in)
• FM200 / inerge gas extinguishing systems (server rooms)
• NFPA / EN 12845 standard that meets automation integration
6. Building Automation (Mechanical Control) Systems
• HVAC automation (heating, cooling, ventilation control)
• Pressure, temperature and flow sensors
• Valves, motorized dampers
• BMS (Building management system) integration
7. Special systems and compressed air (Industrial)
• Compressed air (compressor + receiver tank) systems
• Vacuum systems
• Medical Gas Systems (O₂, N₂O, vacuum, air, CO2)
• Steam and condensate systems
8. Isolation and testing – commissioning
• Thermal, acoustic and vibration isolation
• Air duct and pipe insulation (rubber, glass wool, rock wool)
• Pressure test, leak test, flow rate measurement
• Balancing (balancing), and commissioning of process operations
